Search
Filters
Close

How To Measure

A proper measurement is critical for a good fitting and properly working Elator.

 

-GOOD- If you plan to measure with the paper print out, please watch the video first, then click on the pdf to the right to print out the form. When you print make sure you select “Do not scale image” on your print dialog box.
 Free Information Package
-BEST- If you wish to order a free measuring kit, click this FREE Starter Kit link, fill out the required information and we will mail you a dvd, a band and a brochure in a discrete package at no charge. 
 Free Information Package

   
How to measure with paper ruler How to measure with silicone band
       

Cut out the entire ruler labelled “Length” along the dotted line from the above pdf. 

All measurements must be performed on a non-erect FULLY stretched penis.

Hold the end of the paper ruler marked “0” at the base of penis.

Push Band Band To Pelvic Bone 

All measurements must be performed on a non-erect FULLY stretched penis.

Hold the end of the band marked “0” at the base of penis and press back until you hit your pelvic bone.

Push Band Band To Pelvic Bone 

Press back untill you are firmly against your pelvic bone.

Pull Penis Forward To Measure Length

Hold the tip of your non-erect penis and stretch it out as far as you comfortably can. 

Pull Penis Forward To Measure Length

Hold the tip of your non-erect penis and stretch it out as far as it can comfortably extend.

Measure to the tip of the head. In this example the ruler measures 15.

Note: If your length is in between numbers (on the line), use the lower number (this is critical, do not round up... only round down).

Pull Forward And Look Down To See Your Girth

Measure to the tip of the head. In this example the ruler measures 13. 

Note: If your length is in between numbers (on the line), use the lower number (this is critical, do not round up... only round down).

Pull Forward And Look Down To See Your Girth

Cut out the ruler labelled “Circumference” along the dotted line from the above pdf.

Fully pull or roll back the skin behind the head under the penis.

 Pull Foreskin Back To Measure Girth Behind The Head Of Your Penis Fully pull or roll back the skin behind the head under the penis and apply lubricant to the area directly behind the head of your penis. Pull Foreskin Back To Measure Girth Behind The Head Of Your Penis

Hold the end of the ruler marked “0” against the shaft directly behind penis head.

Wrap the ruler tightly around your exposed shaft until it overlaps and meets at “0”.

 Make Sure To Line Up 0 When Measuring Girth

Loop the band thru the opening so the letters are on the outside of the ring. Wrap the ruler around your exposed shaft until tight.

Pull the band tight so it is snug against your penis.

Girth Side Of Measuring Band Loop

Pull the ruller tight so it is snug against your penis. You want to make sure that its tight enough so the Elator will not slip off when lubricated and in use while flacid.

In this example the measurement is “F”.

Note:If your measurement is on the line of 2 letters, use the smaller letter.
 Girth Size Determined Once Band Is Lubed And Tight

Hold the flap and band with one hand, then use your other hand on the opposite side and pull your penis forward to a comfortable length.You want to make sure that its tight enough so the Elator will not slip off when lubricated. In this example the measurement is “D”. 

Note: If your measurement is on the line of 2 letters, use the smaller letter.

Girth Size Determined Once Band Is Lubed And Tight